mix 1.10 and scs 1D&scs1M with mac osx

[razaka]

mix 1.10 and scs 1D&scs1M with mac osx
i use a mac book, i have 2 scs 1D and scs 1M
all button work well(when i choose contreol in platter option in scs 1D)
but the platter doesn't work..
if i did not use darouter, the platter continue to turn after i run mixx and when i charge a song, the song play very fast.and i can't stop the platter and i can't stop the song.
so when i use darouter before, the platter don't play when i push play
so i don't now what is the problem
do i need to turn with mixxx 1.9????
pleas help

[Pegasus]

Mixxx 1.10 should work fine. Make sure you have DaRouter closed, then reset the units (turn them off and back on,) then start Mixxx. (DaRouter is not used with Mixxx.) Reload the mappings in the preferences, then try using them. Let me know how it goes.

[razaka]

the same thing happen
what is the difference with the download mixxx 10.5 32 bit intel and mix 10.5 universal
my mac book is a mac OSX 10.6.4,can the problem comiing of that?

[Pegasus]

The Universal build contains 32-bit and 64-bit code, so it shouldn't work any differently.

Did you say that everything worked fine in Mixxx 1.9.2? (You can download it again from here to test.)

Let's isolate the issues you're seeing in 1.10.0: (close Mixxx before turning off/on any of the devices.)
1) With only the SCS.1m (mixer) on, does it work correctly by itself?
2) With only the SCS.1d (deck) on, does the platter stop moving when Mixxx initializes it and it lights up?
3) Does the platter stop if you switch from Vinyl to Control or Browse mode? (It should.)
4) Does the platter stop if you press Deck Select?
5) Does the platter stop if you press Play or Cue a couple of times? (with no song loaded)

6) What firmware version is on your mixer and deck? Press Setup and it will show it on the LCD displays. The deck requires firmware 1.25 or later. (1.27 is the latest.)

[razaka]

hello
my firmware is 1.27
i download mixxx 1.9.2 and the same thing happen!
i try all you say, so i try just one scs1D but the platter don't stiop
another thing i see, the pitch is not in the center but about 20 pourcent lower,or in the software the pitch is in 0.
i don't now what is the problem, i see the same problem in mixxx topic in stanton forum so i'm not the only
i hope you thind the solution
i

[razaka]

maybe what is the source code?do i need to dowload this?

[razaka]

ah and with scs1M only, all work good
the problem is on scs1d
and in the software the auto loop don't work, just the loop in and loop out work

[Pegasus]

Hmm, it sounds like the protocol isn't quite working the same on OSX as it does on Windows. I'll have to talk with Stanton about that. In the meantime, do you have a friend with a Windows PC that has firewire that you could test your SCS.1d on with Mixxx 1.10.0?

I still have to implement beat loop and sampler functionality on the SCS.1d, so be on the lookout for that.

[razaka]

ok
i have a pc with a firewire but the sound stop every few second with my pc, the firewire is not very good (many pc have this problem with scs 1M)
but i try it later to see the result of the platter and i'll say you what happens
so i hope you to solve this problem (many software was more develloped with windows or many dj use mac, because sometimes windows bug)

thanks a lot, i wait for update or solution

dj ahtraddis
www.ahtraddis.com

[razaka]

do you have news from stanton about this problem??