Mapping for the VCI-300

XML preset files and script files (.js) for MIDI and other controllers.

Moderators: garth, User Customization Moderators

Re: Mapping for the VCI-300

Postby tapir » Mon Oct 07, 2013 8:30 pm

Final version (hopefully) that completes the stutter play implementation:
  • Adjust the stutter play position when setting a new cue point on the fly by pressing Shift + Cue while playing.
Mixxx_Vestax-VCI-300_2013-10-07.zip
(9.77 KiB) Downloaded 531 times
tapir
Mixxx Developer
 
Posts: 367
Joined: Sat Aug 04, 2012 12:03 pm
Location: Stuttgart

Re: Mapping for the VCI-300

Postby tapir » Sat Oct 12, 2013 4:05 pm

Argh, the number of steps for a single revolution of the jog wheel was wrong since the beginning! Re-measuring exactly with stickers showed that the VCI-300 delivers only 1600 instead of 1664 steps.

Adjust and fine-tune parameters:
  • Exactly measured and adjusted the jog resolution parameters. It's only 1600 instead of 1664 steps per revolution!! This was wrong since the initial version :(
  • Synchronized jog feedback between scratching and cueing by using a linear characteristic
  • Slightly increased sensitivity for jog scrolling
  • Some code cleanup
Mixxx_Vestax-VCI-300_2013-10-12.zip
(10.11 KiB) Downloaded 584 times
tapir
Mixxx Developer
 
Posts: 367
Joined: Sat Aug 04, 2012 12:03 pm
Location: Stuttgart

Re: Mapping for the VCI-300

Postby tapir » Sun Mar 23, 2014 11:44 am

Beat sync/active changes and cleanup for 1.12
  • Change mapping of the Auto Tempo / Sync button: Sync is now only triggered in combination with Shift, while pressing the button without the Shift key toggles quantize on/off. Before it was just to easy to accidentilly trigger Sync by hitting the wrong button!
  • Disable the beat active indicator LED, because it has not proven to be helpful.
  • Reduce jog tempo sensitivity considerably.
  • Some minor cleanups before adding new features for 1.12
Mixxx_Vestax-VCI-300_2014-03-22.zip
(10.46 KiB) Downloaded 557 times
tapir
Mixxx Developer
 
Posts: 367
Joined: Sat Aug 04, 2012 12:03 pm
Location: Stuttgart

Re: Mapping for the VCI-300

Postby tapir » Sun Mar 23, 2014 11:46 am

Anyone using the Reverse function?? Otherwise in 1.12 Shift + Censor = Reverse will become the new toggle button that turns the corresponding Mid EQ right next to it into a filter knob 8-)
tapir
Mixxx Developer
 
Posts: 367
Joined: Sat Aug 04, 2012 12:03 pm
Location: Stuttgart

Re: Mapping for the VCI-300

Postby tapir » Thu Jun 19, 2014 11:56 pm

2014-06-20 Major rework for 1.12
  • Replace script binding with direct MIDI mapping wherever possible
  • Use new cue/play controls
  • Rework looping

!ONLY FOR 1.12!
Mixxx_Vestax-VCI-300_2014-06-20.zip
(9.72 KiB) Downloaded 480 times
tapir
Mixxx Developer
 
Posts: 367
Joined: Sat Aug 04, 2012 12:03 pm
Location: Stuttgart

Re: Mapping for the VCI-300

Postby tapir » Fri Jun 20, 2014 9:29 am

2014-06-20.1 Replace reverse play with filter effect
  • Assign 1st/2nd effect unit with preselected Filter chain to left/right deck respectively
  • Shift + Censor button enables/disables the filter effect
  • Mid EQ controls the filter parameter while the filter is enabled

!ONLY FOR 1.12!
Mixxx_Vestax-VCI-300_2014-06-20.1.zip
(10.2 KiB) Downloaded 447 times
tapir
Mixxx Developer
 
Posts: 367
Joined: Sat Aug 04, 2012 12:03 pm
Location: Stuttgart

Re: Mapping for the VCI-300

Postby tapir » Fri Jun 20, 2014 10:47 pm

2014-06-21 Smart switching between mid EQ and filter effect
  • Track the knob's value and restore it when switching between mid EQ and filter effect

!ONLY FOR 1.12!
Mixxx_Vestax-VCI-300_2014-06-21.zip
(10.27 KiB) Downloaded 445 times
tapir
Mixxx Developer
 
Posts: 367
Joined: Sat Aug 04, 2012 12:03 pm
Location: Stuttgart

Re: Mapping for the VCI-300

Postby tapir » Sun Jul 13, 2014 8:09 pm

2014-07-13 Use new 1.12 sync controls
  • The Auto Tempo button now triggers the new sync_enabled control. Tapping the BPM manually by holding Scroll is still possible.
Mixxx_Vestax-VCI-300_2014-07-13.zip
(10.3 KiB) Downloaded 459 times
tapir
Mixxx Developer
 
Posts: 367
Joined: Sat Aug 04, 2012 12:03 pm
Location: Stuttgart

Re: Mapping for the VCI-300

Postby tapir » Wed Aug 20, 2014 8:48 pm

2014-08-18: Sync mapping with push-and-hold

  • Use MIDI mapping for "sync_enabled" to support push-and-hold
  • Use setParameter() instead of setValue() for effect parameters

Mixxx_Vestax-VCI-300_2014-08-18.zip
(10.33 KiB) Downloaded 553 times
tapir
Mixxx Developer
 
Posts: 367
Joined: Sat Aug 04, 2012 12:03 pm
Location: Stuttgart

Re: Mapping for the VCI-300

Postby Groschi » Wed Apr 08, 2015 1:48 am

I just ordered a VCI 300 MK2 to replace my american audio VMS2. So big thanks to Tapir for creating this mapping. This is gonna be great!
Groschi
 
Posts: 21
Joined: Sat May 23, 2009 4:36 pm
Location: Moers, Germany

PreviousNext

Return to Controller presets/mappings

Who is online

Users browsing this forum: No registered users and 4 guests