User Tools

Site Tools


faderfox_dj2

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
faderfox_dj2 [2016/08/11 12:38]
gosseyn
faderfox_dj2 [2016/08/11 17:57] (current)
be.ing [Encoders Section]
Line 27: Line 27:
 The two encoders on top of the controller control various parameters. They can of course be turned but also act as push buttons. You can select which function is used for each of the encoders by pushing the black buttons of the encoders section. LEDs indicate which function is currently selected. The two encoders on top of the controller control various parameters. They can of course be turned but also act as push buttons. You can select which function is used for each of the encoders by pushing the black buttons of the encoders section. LEDs indicate which function is currently selected.
  
-  * //​List/​Load//​ (top red LED is on) lets you browse your playlist. Push the left encoder to load the highlighted track into Deck A or the left encoder for Deck B. +  * //​List/​Load//​ (top red LED is on) lets you browse your playlist. Push the left encoder to load the highlighted track into Deck A or the right encoder for Deck B. 
   * //​Seek/​Scratch//​ (top green LED is on) acts as a jogwheel. Turn the left encoder for Deck A or the right encoder for Deck B. Pushing the encoder on that setting will activate //Sync// on that deck.   * //​Seek/​Scratch//​ (top green LED is on) acts as a jogwheel. Turn the left encoder for Deck A or the right encoder for Deck B. Pushing the encoder on that setting will activate //Sync// on that deck.
   * //Gain// (bottom green LED is on) controls the gain of the channel. Pushing the encoder on that setting will mute the track.   * //Gain// (bottom green LED is on) controls the gain of the channel. Pushing the encoder on that setting will mute the track.
faderfox_dj2.txt ยท Last modified: 2016/08/11 17:57 by be.ing