Skip to content

Hercules Djcontrol Compact

Be.ing edited this page Mar 19, 2017 · 12 revisions

Hercules DJ Control Compact

The Hercules DJ Control Compact is a simple controller for basic two-channel mixing. This device does not have a built in sound card, so it would require a splitter cable or separate sound card to be able to preview tracks in headphones. It also does not have buttons for routing decks to headphones.

Thanks to Hercules for supporting the development of this mapping by providing a controller.

Mapping description

The play/pause buttons, EQ knobs, volume knobs, and crossfader all behave as labeled. If you would like to change the mapping of the EQ knobs (for example to change the volume knob to control the high EQ and use the crossfader for volume), use the MIDI Mapping Wizard or edit the XML file.

Shift + Play jumps to the beginning of the track and stops playback.

The cue button behaves differently depending on the cue mode set in Mixxx's Preferences.

The sync button synchronizes the tempo to the other deck. Press and hold sync to engage Master Sync.

There is only one each of the Mode, Shift, and Scratch buttons, so they affect both decks.

Shift + Scratch (Automix) toggles AutoDJ on/off.

Jog Wheels

When Scratch is off, turning a jog wheel bends the pitch of the track. When Scratch is on, turning a jog wheel scratches that deck. Holding Shift and turning a jog wheel adjusts the playback rate (tempo). Enable keylock on a deck by clicking the music note button on screen if you do not want the pitch to change when adjusting the tempo.

Pad Grid

Press the MODE button to cycle through each pad mode.

Loop mode

In loop mode, the buttons are mapped in a way that's more artistically expressive:

  • Button 1 enables and disables the loop
  • Button 2 enables an 8 beat loop
  • Button 3 divides the current loop in half
  • Button 4 doubles the length of the current loop
  • Shift + Button 1 performs an 1/8th beat roll
  • Shift + Button 2 performs an 1/4th beat roll
  • Shift + Button 3 performs an 1/2th beat roll
  • Shift + Button 4 performs an 1 beat roll

FX mode

  • Button 1 enables and disables the first FX chain for Channel 1
  • Button 2 enables and disables the second FX chain for Channel 1
  • Button 1 enables and disables the first FX chain for Channel 2
  • Button 2 enables and disables the second FX chain for Channel 2

Shift-FX buttons are not mapped.

Sampler mode

  • Left side buttons play Sample Decks 1 through 4
  • Right side buttons play Sample Decks 5 through 8
  • Shift + Buttons stops Sample Deck and puts the playhead at the cue point

Cue mode

  • Each button activates the hotcue with that number
  • Shift + button clears the hotcue with that number

MIDI Mapping Reference

Much of the Compact's behavior is hard-coded into its firmware, including shift button messages and button mode selections.

http://ts.hercules.com/download/sound/manuals/DJC_Compact/DJC_Compact_MIDI_Mapping.pdf

Clone this wiki locally