This is an old revision of the document!
This controller is a class compliant USB MIDI and audio device, so it can be used without any special drivers on GNU/Linux, Mac OS X, and Windows. However, if you wish to use the ASIO sound API under Windows, please install the latest driver package available from the Support page.
This controller has built-in 4 channel output sound card, with MASTER output (RCA) and HEADPHONE output (3.5mm jack).
* Open Preferences > Sound Hardware
* Select the Output tab
* From the Master drop-down menu, select the audio interface, then Channels 1-2
* From the Headphones drop-down menu, select the audio interface, then Channels 3-4
* Click Apply to save the changes.
Please refer to the user manual for more details about the audio configuration in Mixxx.
The Master and Headphone knobs, as well as the Master button are hardware controls and interact directly with the integrated sound card's output. Although they also send MIDI messages, they have NOT been mapped in Mixxx, so do not expect an on-screen reaction when using them. This was done to prevent the knobs to adjust both the gain on the controller's sound card and in Mixxx.
Please refer to the user manual in order to learn how to set your levels properly when using Mixxx.
* Master knob (Hardware control)
* Headphone knob (Hardware control)
* Master buttons (Hardware control)
* Beatmatch guide (Hardware control)
* PADS: Slicer/Slicer Loop
* PADS: Toneplay
* PADS: FX
== NOTE == : When in FX mode, each pad will send multiple and different Note and CC messages. As these could not all be used properly with Mixxx current effect framework still in development, the pads have not been assigned in the original mapping.
Sync = Sync lock
SHIFT + SYNC = Sync master.
Cue = Cue point
SHIFT + CUE = Return to beginning of loaded song.
Play = Play/Pause
SHIFT + Play = Cue Stutter.
Vinyl = Scratch On/Off (Default: ON)
Q = Keylock
Beat Align LED = Track end warning (Make sure Beatmatch Guide is On for this to work)
Loop In = Beatloop 4 beats
SHIFT + Loop In = Loop Halve.
Loop Out = Beatloop Off
SHIFT + Loop Out = Loop Double.
Encoder = Move up/down list
Encoder button = Switch focus between List and file view
SHIFT + Encoder button = Maximize/Minimize broser view
Assistant = AutoDJ On/Off
FX On = FX 3 On/off
SHIFT + FX On = FX 3 Select (next effect)
PADS - Hot Cue:
Set and trigger Hot Cue 1-4
SHIFT + Pad = Delete Hot Cue 1-4.
PADS - Roll:
Pad 1-4 = Beatloop 1 / 2 / 4 / 8 beats
PADS - Sample:
Trigger Sampler 1-4 (Deck A)
Trigger Sampler 5-8 (Deck B)
PADS - Beatjump:
Pad 1-2: Beatjump Backward/Forward 1 beat
Pad 3-4: Beatjump Backward/Forward 2 beat
Pad 5-6: Beatjump Backward/Forward 4 beat
Pad 7-8: Beatjump Backward/Forward 8 beat