User Tools

Site Tools


roland_dj-505

Roland DJ-505

static.roland.com_assets_images_products_gallery_dj-505_t_gal.jpg

The Roland DJ-505 is an all-in-one USB MIDI controller with an integrated audio interface. It has controls for 2 decks that can be toggled between decks to play with 4 decks. It also features a TR-S step sequencer with sounds from the TR-808 and the TR-909 drum machines (TR-606 and TR-707 are available via firmware update).

Drivers

You can download the latest Windows & MacOS drivers and firmware from the manufacturer's website. Since the DJ-505 is a USB class compliant MIDI and audio device, the device is plug-and-play on Linux.

Controller Mapping

A mapping has been added to Mixxx prior to the 2.3.0 release.

Audio Channels

The mapping relies on the following channel assignments (for line/phono input support, applying effects to the TR-S output, etc.):

Output
Channels Assigned to
1-2 Master
2-3 Headphones
Input
Channels Assigned to
1-2 (CH 1 Line/Phono) Vinyl Control 1
3-4 (CH 2 Line/Phono) Vinyl Control 2
5-6 (Mix) Record/Broadcast
7-8 (TR-S output) Auxiliary 1

Note: You should assign the Vinyl Control input channels even if you do not intend to use timecode vinyl. These channel assignments are also needed to make the CH 1/2 PC/LINE/PHONO switches work (i. e. passing through line or phono input to the left/right deck).

Controls

A schematic drawing with the control numbers that are used here can be found on the specified page in the Owner's Manual.

Browser section (p. 4)
No. Control Function
1 [LOAD] buttons Load song into deck.
1 [SHIFT] + [LOAD] button (left) Sort library by BPM (press repeatedly to toggle ascending/descending order).
1 [SHIFT] + [LOAD] button (right) Sort library by key (press repeatedly to toggle ascending/descending order).
2 Rotary Selector Turn to move tracklist cursor up/down.
2 [SHIFT] + Rotary Selector Turn to move sidebar cursor up/down. Press to toggle the selected item.
3 [BACK] button Not yet mapped.
3 [SHIFT] + [BACK] button Sort library by title (press repeatedly to toggle ascending/descending order).
4 [ADD PREPARE] button (Un-)Maximizes the library view.
4 [SHIFT] + [ADD PREPARE] button Sort library by artist (press repeatedly to toggle ascending/descending order).
Deck section (p. 5-6)
No. Control Function
1 Jog dial (top surface) Perform scratch operation.
1 Jog dial (outer edge) Rotate to lower/raise playback speed (and pitch if key lock is off).
1 [SHIFT] + Jog dial (top surface) Search fast through the playback location.
2 [SLIP] button Hold to turn on slip mode temporarily or double press to turn it on permanently.
2 [SHIFT] + [SLIP] button Toggle vinyl control mode.
3 [SHIFT] button Hold down to access other functions.
4 [SYNC] button Match tempo and phase of other deck. Long press to enable Master Sync.
4 [SHIFT] + [SYNC] button Cancels Sync mode.
5 [CUE] button Specifies, plays or recalls temporary cue point.
5 [SHIFT] + [CUE] button Returns to the beginning of the song.
6 [PLAY/PAUSE] button Plays or pause the song.
6 [SHIFT] + [PLAY/PAUSE] button Hold to play backwards.
7 Pad Mode Select See section “Performance Pads”.
8 Performance Pads See section “Performance Pads”.
9 PARAMETER area See section “Performance Pads”.
10 LOOP area: [AUTO LOOP] button Turns auto loop on/off.
10 LOOP area: [1/2X], [2X] button Set the loop playback length to half/double.
10 LOOP area: [SHIFT] + [1/2X] button Move the loop by it's length toward the left.
10 LOOP area: [SHIFT] + [2X] button Move the loop by it's length toward the right.
10 LOOP area: [IN], [OUT] button Specify loop-in/loop-out points.
10 LOOP area: [SHIFT] + [IN] button Toggle beats quantization.
10 LOOP area: [SHIFT] + [OUT] button Cancels loop playback, go to loop-in point and resume playback.
11 [DECK 3], [DECK 4] buttons Switches the deck (left: decks 1 and 3, right: decks 2 and 4)
12 [KEY LOCK] Toggle key lock.
12 [SHIFT] + [KEY LOCK] Cycles through tempo slider range (8%, 16%, 50%).
13 Tempo slider Adjust song playback speed (and pitch if key lock if off).
Mixer section (p. 7)
No. Control Function
1 [TRIM] knobs Adjust the volume.
2 [HI], [MID], [LOW] knobs Adjust the high/mid/low-frequency regions of the song.
3 [FILTER] knobs Applies high-pass/low-pass filter of the song.
4 Channel [CUE] buttons Toggle PFL for each channel.
4 [SHIFT] + [CUE] buttons (short press) Adjust beatgrid so that the closest beat is set to the current cursor position.
4 [SHIFT] + [CUE] buttons (long press) Adjust beatgrid to match another playing deck.
4 [SHIFT] + [CUE] buttons (tap repeatedly) Set tempo by tapping on each beat.
5 Channel faders Adjust the output level for each channel.
6 Cross fader Fades between left and right deck.
7 [MASTER LEVEL] knob Adjusts the master output level.
8 [BOOTH LEVEL] knob Adjusts the output level of the BOOTH OUT jacks.
9 [MIXING] knob Fades between PFL and master output.
10 [TR/SAMPLER LEVEL] knob Adjusts output of the TR-S (Aux 3) and Samplers 1-16.
11 TR/SAMPLER [CUE] button Toggle PFL of the TR-S (Aux 3) and Samplers 1-16.
12 Level indicator Indicate the output level of each channel and master.
Effect section (p. 7)
No. Control Function
1 CH ASSIGN area Toggle FX 1/2 for decks 1/2 (3/4 if [SHIFT] is pressed) or the TR-S (Aux 3) and Samplers 1-16.
2-5 Various See Standard effects mapping.
TR-S section (p. 8)
No. Control Function
1 [VALUE] knob See Owner's Manual.
2 [SHIFT] button Hold down to access other functions.
3 Display See Owner's Manual.
4 [SYNC] button Match tempo of playing deck (phase matching is not implemented yet, use the NUDGE button instead).
4 [SHIFT] + [SYNC] button Not yet mapped.
5-17 Various See Owner's Manual.
Front Panel (p. 8)
No. Control Function
1 [PHONES] jacks Connect headphones here.
2 [VOLUME] knob Adjust the volume of the headphones.
3 [CROSS FADER] switch Switch the cross fader response curve.
4 [REVERSE] switch Switch cross fader reverse (hamster) mode on/off.
5 [CH1], [CH 2] switches: [PC] Selects Mixxx deck as input source (Unmute the Mixxx deck and mute Aux 1/2).
5 [CH1], [CH 2] switches: [LINE/PHONO] Selects Line/Phono input source (Mute the Mixxx deck and unmute Aux 1/2).
6 [MIC LEVEL] knob Adjust the microphone volume.

Performance Pads

You can use the Pad Mode Select buttons to select a mode for the performance pads.

Control Mode LED Color
[HOT CUE] button Hot Cue Mode White
[SHIFT] + [HOT CUE] button Cue Loop Mode Blue
[ROLL] button Roll Mode Light blue
[ROLL] button (press twice) Loop Mode Green
[TR] button TR Mode Red
[SHIFT] + [TR] button Pattern Mode Green
[TR] button (press twice) TR Velocity Mode Orange
[SAMPLER] button Sampler Mode Magenta
[SHIFT] + [SAMPLER] button Velocity Sampler Mode Purple
[SAMPLER] button (press twice) Pitch Play Mode Green

Most pad modes are similar to those found when used with Serato. A notable exception is the Loop Mode, which replaces the Serato's Saved Loop Mode. In this mapping, the Loop Mode is similar to the Roll mode, but sets a non-rolling beatloop instead.

  • Hot Cue Mode: Press a pad that is unlit to assign a hot cue point to it. If a pad is lit, press it to start playback from the hot cue location. Hold [SHIFT] and a pad to clear the hot cue. Use the PARAMETER BUTTONS for moving the beatgrid left/right.
  • Cue Loop Mode: When the deck is playing and a pad that is lit is pressed, auto loop will start from the location of the hot cue point that is assigned to the pad. If the pad is not lit, a hot cue is specified at the current location and auto loop starts immediately.
  • Roll Mode: While holding down a performane pad, a rolling loop plays with the beatlength that is assigned to the pad. The pad that creates a roll of 4 beats length is illuminated. Each pad to the right doubles the length, left halves it. You can use the PARAMETER buttons to cycle through four sets, as described in the Owner's Manual.
  • TR/Pattern/TR Velocity Modes: These modes are hardcoded in the device, so they work exactly as described in the Owner's Manual.
  • Sampler/Velocity Sampler Play Modes: Press a pad that is unlit to load the track under the cursor into the sample slot assigned to the pad. If the pad is lit, the sample in the slot is played. In Velocity Sampler Mode, pressing the pad stronger results in a louder sample playback volume. When holding [SHIFT] and pressing a pad, sample playback is stopped. If the sample is not playing, the slot is cleared.
  • Pitch Play Mode: Play from a hot cue point and change the pitch in semitone steps. Pads right of the white lit pad raise the pitch, pads left of it lower the pitch. Hold [SHIFT] and press a dimly lit pad to select hot cue point. Use the PARAMETER buttons to cycle though different semitone ranges (Up, Mid, Down).

The other modes that are described in the owner's manual (Slicer, Slicer Loop, Saved Loop, Flip) are currently not mapped.

Known Issues

  • TR-S Syncing currently works at the BPM level, but phase syncing is not implemented yet. As a workaround, the NUDGE button can be used to adjust the phase. This depends on MIDI clock I/O (Launchpad Bug #682221).
  • Some performance pad modes are missing (Slicer [ Launchpad Bug #1828886 ], Slicer Loop, Saved Loop, Flip)
  • Some buttons are not mapped yet (e.g. BACK)
  • LEDs on BACK/ADD PREPARE do not work (this seems to be a hardware/firmware bug and does not work in Serato either)
  • Controller does not send current cross fader value on Serato Sysex Message (this seems to be a hardware/firmware bug and does not work in Serato either)
  • Support for colored hotcues has been added, but depends on PR #2030 which has not been merged yet.
Translations of this page:
roland_dj-505.txt · Last modified: 2019/06/16 04:50 by hlzhs