User Tools

Site Tools


roland_dj-505

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
roland_dj-505 [2019/11/17 03:39]
dogo77 Output channels should be 1-2 and 3-4
roland_dj-505 [2019/11/27 07:22] (current)
hlzhs [Audio Setup]
Line 33: Line 33:
  
 The microphone, TR-S drum machine, and external inputs are mixed together in input channels 5-6, so Mixxx can record and broadcast them. The microphone, TR-S drum machine, and external inputs are mixed together in input channels 5-6, so Mixxx can record and broadcast them.
 +
 +The knobs for MASTER LEVEL, BOOTH LEVEL, PHONES VOLUME, MIC LEVEL, TR/SAMPLER LEVEL and CUE/MASTER MIXING are controlling the hardware mixer of the built-in audio interface. Hence, turning the knobs will change values in the Mixxx GUI and you'll need to set them to their default values when using the controller:
 +
 +{{ ::​2019-11-27-130732_182x403_scrot.png?​400 |}}
  
 **Note:** You should assign the Vinyl Control input channels even if you do not intend to use timecode vinyl. These channel assignments are also needed to make the CH 1/2 PC/​LINE/​PHONO switches work (i. e. passing through line or phono input to the left/right deck). **Note:** You should assign the Vinyl Control input channels even if you do not intend to use timecode vinyl. These channel assignments are also needed to make the CH 1/2 PC/​LINE/​PHONO switches work (i. e. passing through line or phono input to the left/right deck).
roland_dj-505.txt ยท Last modified: 2019/11/27 07:22 by hlzhs