User Tools

Site Tools


This is an old revision of the document!

Stanton SCS.1d

Latest MIDI mapping & script files


Stanton's DaRouter is not used with Mixxx 1.9.0 and up. Close it before starting Mixxx.

  1. Download the files for the applicable version of Mixxx below.
  2. Save the files into:
    • Windows: C:\Program Files\Mixxx\midi (technically %PROGRAMFILES%\Mixxx\midi)
    • OS X: /Applications/
    • Linux: /usr[/local]/share/mixxx/midi
  3. Turn the controller on.
  4. Start Mixxx
  5. Open Preferences
  6. Expand “MIDI Controllers”
  7. Select the “Stanton SCS.1d” device
  8. Click the Enable checkbox in the right pane
  9. Click the drop-down and choose the “Stanton SCS.1d” mapping
  10. Click OK and you're good to go. (The controller should initialize, light up and stop spinning.)


Important: Make sure your unit(s) are at firmware v1.25 or higher so that the platter and flashing lights on deck changes work correctly. See Stanton's SCS.1d page here and click Downloads.

Note: the controller is not yet supported in Linux. We have a plan to fix that in a future Mixxx version.

The mapping shipped with Mixxx v1.9.0 was unfinished. Download the updated one below.

The latest official MIDI mapping and script file are in the 1.9 release branch and can be downloaded from here:

Mixxx user's guide for the SCS.1d

Translations of this page:
stanton_scs.1d.1298052411.txt.gz · Last modified: 2011/02/18 13:06 by pegasus